Connect with us

Gear

New Guns And Gear March 2024

New Guns And Gear March 2024

Looking for a new iron or piece of kit to enhance the one you already own? Check out these 7 new bits of guns and gear to grow your firearms wish list.

The New Guns And Gear:

WOOX Titano

woox
Heirloom looks with state-of-the-art performance, the WOOX Titano stands out in competition stocks. Tailored for Benchrest and F-Class shooters, the stock boasts a stunning American walnut stock and an aircraft-grade aluminum chassis. With a 3-inch fore and wide barrel channel supporting up to 1.20-inch diameter barrels, it accommodates large fire tubes common to comp rifles. Furthermore, WOOX’s Suspense weight system allows you to precisely balance the system with six 2.5-ounce weights. The buttstock is fully adjustable for both the length of pull and cheek rise. Other notables include a smooth-bottom bag rider butt and Integrated thumb rests to enhance grip comfort.
MSRP: $999


Taylor’s & Company 1875 Outlaw Revolver

Taylors 1875
A collaboration with Uberti, Taylor’s & Company offers up a faithful reproduction of a classic Remington single-action, but with a modern twist—it’s chambered for 9mm. While no Old West outlaws pitch Parabellum, the modernization effort makes it easier on contemporary cowboys’ pocketbooks. Available in 7.5- and 5.5-inch barrel lengths, the 1875 Outlaw features smooth walnut grips, a forged blued steel frame, a rear frame notch and a fixed front blade sight. Also, the webbed ejector rod helps the wheelgun cut an unmistakable profile. It’s enough to make Frank James envious.
MSRP: $698


StopBox Chamber Lock

chamber lock
New or old, it’s wise to stop the unauthorized use of a firearm. That’s where the Chamber Lock comes into play. At once, it keeps a firearm safe, yet at hand. Construct-ed from Type II hard-anodized 6061-T6 aluminum, it features a patented mechanical hand gesture code lock, ensuring intuitive use even in low-light or high-stress situations. The lock offers six configurable combinations, expandable to 16 with the Actuator Accessory Pack, although preset combinations are recommended for optimal security. Compatible with most AR-15s and shotguns.
MSRP: $150


MTM Case-Gard Bull Rifle Rest

MTM rifle rest
Dialing in a rifle is the key to a solid shooting platform. MTM Case-Gard provides just this with its affordable Bull Rifle Rest. With an adjustable length between 18.3 and 26 inches, it accommodates nearly any long-gun you shoulder. Additionally, the lightweight rest features slip-free rubber feet and a wide stance, for a wobble-free shooting base. And front elevation adjustments are easily made on the rest, thanks to a screw system allowing you to get a rifle or shotgun situated just right.
MSRP: $43


Mission First Tactical Leather Hybrid Holsters

MFT holster
What a looker! Too bad it’s meant to be kept under wraps. This Kydex and leather gem offers exact tolerances, secure retention and easy re-holstering. Plus, the hanger requires no break-in time compared to its traditional leather cousins. Versatile for AIWB, IWB or OWB use, it accommodates right- and left-hand positioning. Additionally, the American-made hybrids are red-dot compatible and have an audible “CLICK” when you re-holster.
MSRP: $70


Ruger Diamond Anniversary Limited Edition SR1911 Pistol

Ruger Diamond 1911
In celebration of its 75th year, Sturm, Ruger & Company presents its limited-edition 75th Anniversary Ruger SR1911. This iconic pistol features a finely detailed, laser-engraved slide and custom grip panels with intricate scrollwork. Ruger’s CNC-controlled machining ensures precision, while the classic 1911 fire control and positive barrel lockup enhance accuracy. You’ll have to act fast on these beauties, only 750 units are being produced in 2024, and each pistol bears the special R75 serial number prefix and ships in a marked case with two stainless-steel magazines.
MSRP: $1,800


Federal Premium Hydra-Shok Deep .32 Auto

Federal 32 Auto
In the day and age of deep carry, good ol’ .32 ACP is making a bit of a comeback. Federal Premium is supporting its renaissance with the introduction of Hydra-Shok Deep in the pocket caliber. Rigorous testing and stringent manufacturing processes ensure superb accuracy and consistent ballistic performance of this ammo. Furthermore, the notched copper jacket of the Hydra-Shok bullet ensures consistent controlled expansion and adequate stopping power trigger pull in and out.
MSRP: $35, box of 20

Editor’s Note: This article originally appeared in the March 2024 issue of Gun Digest the Magazine.


Get More Guns And Gear:

44-Targetposters-pack-GD-reduced-300

Next Step: Get your FREE Printable Target Pack

Enhance your shooting precision with our 62 MOA Targets, perfect for rifles and handguns. Crafted in collaboration with Storm Tactical for accuracy and versatility.

Subscribe to the Gun Digest email newsletter and get your downloadable target pack sent straight to your inbox. Stay updated with the latest firearms info in the industry.

Source link: https://gundigest.com/gear-ammo/guns-and-gear-march-2024 by Gun Digest Editors at gundigest.com

(Visited 1 times, 1 visits today)
Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Gear

Hardware Talk: Dillon Wrench Rack Set

Hardware Talk: Dillon Wrench Rack Set
The Dillon wrench kit comes complete: All you have to do is assemble it onto your press. They are press-specific, so make sure you get the correct one.

Do you ever say to yourself you’ve had enough? More specifically, have you had enough with the litter of tools on your loading bench?

I have.

I’m regularly swapping toolheads to change calibers on my presses as I test this or that, trying something new or swapping calibers. I tried to keep the Allen wrenches for those adjustments in a plastic box, but they always ended up on the bench.

And then, where on the bench were they? Mumble … mumble … mutter.

I finally had enough, so when I saw the wrench rack from Dillon, I knew my 550 and 750 were each going to get a set. The rack is simple: It’s a heavy-gauge stamping that you bolt to the top back of your strong mount, behind your press. You don’t use a strong mount? We’re going to have to talk about that in the next issue.

Dillon has it all covered. You bolt the plate by means of the rear bolts on your press/strong mount setup. The kit comes with the Allen wrench sizes you need to work on your press, plus a die ring wrench as well. They all slide right into their reserved spots. And, just to make it even easier, Dillon includes a strip of label, with the sizes already printed on it, and they’re spaced to line up with the spot for each of them.

Dillon-Wrench-Rack
The Dillon wrench kit bolts into your strong mount, on the back of your Dillon press. Once there, it’s in easy reach to put each one back when done.

Hot tip: Install the label before you bolt on the plate to save yourself the stretching and reaching to get the label in place after you’ve bolted things together.

Wait, there’s more. The wrenches come with the angle to the short leg of each one pre-dipped in vinyl, so you have a good grip and can see the wrench clearly when you go to pluck it out of the rack. As an extra bonus, the working end is a ball-end wrench tip, so you can spin the wrench even when you approach the screw you’re tightening from an angle.

Of course, gear doesn’t come cheap. The kit runs $46 from Dillon.

“Ouch,” you say?

You can buy the wrenches for a buck each. Yes, you can. But then you’ll still have them scattered on your loading bench or in a box you have to find. Once you lose one or use it someplace else and leave it there, you’ll buy another. And another. You’ll end up with three, four or five sets of them scattered to the winds.

With the Dillon kit, you have a place for them. And the Dillon blue vinyl coating lets you know “This is a loading room wrench; I have to get it back there.”

I’m not saying you need to go full-on Marie Kondo on your loading room, bench and components storage, but keeping the tools that get things properly adjusted is a smart thing to do. And when you can make a change by simply grabbing the handy wrench and put it back right where it was, your loading process will be less distracted, more focused and more productive.

Editor’s Note: This article originally appeared in the April 2024 issue of Gun Digest the Magazine.


More On Tools & Gunsmithing:

44-Targetposters-pack-GD-reduced-300

Next Step: Get your FREE Printable Target Pack

Enhance your shooting precision with our 62 MOA Targets, perfect for rifles and handguns. Crafted in collaboration with Storm Tactical for accuracy and versatility.

Subscribe to the Gun Digest email newsletter and get your downloadable target pack sent straight to your inbox. Stay updated with the latest firearms info in the industry.

Source link: https://gundigest.com/more/how-to/gunsmithing/dillon-wrench-rack by Patrick Sweeney at gundigest.com

Continue Reading

Gear

Practice Or Panic: Team Tactic Basics For Couples And Families

Practice Or Panic: Team Tactic Basics For Couples And Families

If you and your loved ones expect to keep cool in an emergency, you need to practice team tactics.

When most think of team tactics, they envision highly trained Delta Force operatives—or a SWAT team—breaching a door and conducting a dynamic entry. That’s a good example of team tactics in action … but few of us will ever participate in an activity like that.

However, that doesn’t mean you shouldn’t develop your team tactics. Well, unless you’re a hermit who has no friends and has moved to the mountains to live alone and write a manifesto. Most normal humans have other humans they often hang with, whether they’re their good friend, a spouse or children.

I’ve had some team tactics training. As a soldier, and back in my badge-wearing days, it was part of the curriculum. I’ve also attended a team tactics course at Gunsite Academy that focused on civilian teams, like a husband and a wife. Recently, I also did some work helping Benghazi survivor and master firearms instructor David “Boon” Benton, who was portrayed in the movie 13 Hours, train our local SWAT team.

Gunsite-course
You’ll learn tactical theory at a team tactics class, but most learning occurs during after action reviews following tactical simulations.

Regardless of the group or situation, there are two things that team operations—whether they involve a six- or two-man team—have in common: A tactically proficient and successful team must have a plan, and they must have good communication.

Determine Your Team

If you’re a loner, you’re your own team (and hopefully someday you’ll find another human who finds you moderately tolerable). For the rest of us who are at least semi-normal, we’ll have a good friend and/or a significant other with whom we’re commonly around. This is your team, and it might also include children.

training-vehicle-truck
A good civilian team tactics course will address common situations like you might experience around vehicles and in parking lots.

Each team member should also have a job. These jobs could be as simple as following your mother, calling 911 or holding on to the hands of your siblings. A job for a team member could be as simple as being armed and making sure an emergency first aid kit is present and accessible, and all team members should be responsible for not forgetting to have their cell phone with them.

This doesn’t have to be complicated. In fact, it’s best when kept simple and generic, and don’t put excessive responsibility on the backs of untrained or juvenile team members. However, every team member should know what the job of the other team members are. At a minimum, this tells them who to look to for guidance, and if capable, others know what each team member is responsible for and then they can assume that role if necessary.

training-home-house
A team tactics course isn’t a shooting course. It’s primarily a course to teach you and your partner how to work—stay alive—together.

In fact, establishing a team chain of command is important. If you’re identified as the team leader, but your wife and kids are out without you, generally your wife would assume that role. This means one of the kids—if capable and of a responsible age—can assume the duties of your wife. This goes a long way toward answering the question, “Dad’s not here. What now?”

Have A Plan

It’s impossible to develop a comprehensive plan for every situation that might develop. However, you can institute operating guidelines for common tasks that might occur. These are established tactical responses, predetermined to deal with things that have a high probability of happening.

Dealing with doors is a perfect example.

During one team tactics course, my partner and I were presented with various reality-based scenarios we had to react to. This was during force-on-force exercises where all the participants were armed with handguns that fired Simunitions. During the prior day while under the guidance of an instructor, my partner and I were given an opportunity to establish some operating guidelines: make a plan.

Gunsite-training
Don’t go to team tactics course planning to learn how to shoot or to run your gun. You need to know that before you get there.

One of our plans was how we’d deal with opening closed doors that led into the unknown. Just before the Simunition training began, I told my partner we should deal with every door just as we had decided during the previous day. This worked well and eliminated unnecessary communication and possible confusion. When we approached a closed door that we had to go through, each of us knew—without a word—what we were supposed to do.

This same concept can apply to a lot of situations.

Let’s say you want to establish a plan to tactically exit a location by vehicle. In this instance, you could identify the person who will drive, where each team member shall sit and how to access the vehicle depending on the direction of approach and even the direction of the potential threat. Sure, when the time comes to implement the plan there may be extenuating circumstances—the pre-identified driver might be injured—but you can plan for that as well: If team member A is injured, then team member C will drive.

injured-partner-training
What do you do if your partner gets hurt? You should have a plan for that.

If you have children, it’s very important to include them in these plans. It’s also important to dry run the plan to make sure everyone is on the same page. If you have an infant, who is going to carry him or her? It could be your wife or an older sibling. If you’re planning a response to a home invasion or burglar, the kids need to know what to do when the alarm sounds.

You should also always have at least one contingency; if you cannot do plan A, execute plan B. Similarly, you should also have a rendezvous point established outside the home, and you should also do the same for commonly trafficked locations such as malls or shopping centers.

team-tactics-instructor-critique
Instructors at a team tactics course not only evaluate your tactics, but they also critique and help you learn to communicate with your partner.

Communication

More than anything else, communication is the most important aspect of team tactics.

Let’s say, for example, you and your wife are engaged in a gunfight and you either need to reload, have a stoppage or maybe you dropped your gun. Your wife needs to know about this while it’s happening; she needs to know why you aren’t shooting or why you’re hiding behind the car. And she needs to be made aware of this without having to watch you or look to see what you’re doing.

team-tactics-corner
How will you and your partner handle a corner like this? You need to know beforehand, and that’s part of planning.

Screaming, “I’m reloading!” or “I’ve lost my gun!” takes too many words and might not be a good idea. Establish simple and direct communications for potential issues ahead of time. You could simply yell out, “Working!” and your wife would know you’re temporarily unavailable. To let her know the problem has been solved, your communication could be as simple as “Up!”

team-tactics-minimal-communication
You and your partner should know how to solve simple tactical problems with minimal communication.

Talking while shooting or while responding to a lethal encounter doesn’t come naturally. It’s something that needs to be practiced. Also, if you’re in a face-to-face encounter with a potential threat, having an action word that’ll key your partner in on an action you’re about to take is a good idea—kind of the opposite of a “safe” word, if you know what I mean. But in some situations, your communication can and should be non-verbal.

You should have hand signals that help convey actions or actives like to cover or watch, to move or maybe even run. Similarly, you should be able to convey the direction you want to move or the location of a potential threat. Think these communications through, keep them as simple as possible and limit them to the obvious. This isn’t a time to establish a new and comprehensive sign language; you simply want to be able to convey highly probable observations or instructions without words, as clearly and quickly as possible.

AR-15-training
Team tactics should be developed with your partner and include the weapon systems you’ll be using.

Go To School

The best way (of course) to learn team tactics is to take a class from a reputable school. But keep in mind that most team tactics courses aren’t shooting courses: Don’t expect to attend a team tactics class to learn how to shoot. In fact, many schools offering team tactics training have a training prerequisite so that they know you can shoot and handle a firearm safely before they’ll let you in the class. Yeah, you’ll do some shooting in a team tactics class, but you won’t learn to shoot in a team tactics class.

training-reload
Gun-handling skills should be learned before attending a team tactics course.

This might seem overly stringent, but it makes perfect sense. It takes about five, 8-hour days of training to go from a non-shooter to someone who is safe and reasonably competent with a defensive handgun. A basic team tactics course should be, at a minimum, 2 to 3 days long … and ideally 5 days. To learn to shoot and to learn team tactics could consume 2 weeks, and most of us can’t take 2 weeks off from life to do that. It’s just like with any other firearms discipline—you learn to shoot and then you learn the tactics.

Editor’s Note: This article originally appeared in the April 2024 issue of Gun Digest the Magazine.


More On Shooting Drills & Training:

44-Targetposters-pack-GD-reduced-300

Next Step: Get your FREE Printable Target Pack

Enhance your shooting precision with our 62 MOA Targets, perfect for rifles and handguns. Crafted in collaboration with Storm Tactical for accuracy and versatility.

Subscribe to the Gun Digest email newsletter and get your downloadable target pack sent straight to your inbox. Stay updated with the latest firearms info in the industry.

Source link: https://gundigest.com/more/how-to/firearm-training/team-tactics by Richard A. Mann at gundigest.com

Continue Reading

Gear

Ammo Brief: 9mm Major – Gun Digest

Ammo Brief: 9mm Major

A quick look at 9mm Major, the slightly bigger older brother of the 9mm Luger.

There are good arguments to be made whether the 9mm Major is simply a hot 9mm Luger load … or another distinct chambering shooting 9mm bullets. It’s not a wildcat nor proprietary load; it has a distinct OAL measurement that makes it suitable for some guns and non-functional for others.

Moreover, some ammo makers have special packaging for the 9 Major loads, and it’s dangerous to shoot 9mm Major in many typical handguns chambered for 9mm Luger rounds, so it deserves some clarification.

Typical 9mm Luger ammunition is loaded to SAAMI specs of about 32,000-psi chamber pressure, which corresponds to velocities between 850 and 1,200 fps, depending on the projectile’s weight. In turn, 9mm Major ammunition is loaded to reach a Power Factor of 165 in IPSC or USPSA competitions. Power factor is determined by bullet weight times velocity, divided by 1,000.

To reach major power factor in USPSA Open Division competition, a 115-grain bullet must reach 1,435 fps, a 124-grain bullet must reach 1,331 fps, and a 147-grain bullet must reach 1,123 fps. If you look at the 9mm Luger loads and ballistics nearby, 9 Major loads are about 200-fps faster by bullet weight.

Note that 9mm Major ammunition is dangerous to fire in a pistol not designed for the excessive pressure generated by loading to the velocities needed. Many handgun makers caution against the use of +P and +P+ ammunition, and 9mm Major loads can generate pressures above +P+, making them unsafe for most off-the-shelf pistols.

Typically, only competition handguns are designed to accommodate these excessive pressures. The most essential feature in Open guns is a ramped barrel providing full case head support. Non-ramped barrels, or any barrel with a large cutout for the feed ramp, are not safe for 9mm Major ammunition.

9mm-Major-data
*OAL: 1.165 ± .005

General Comments

There’s no prescribed pressure limit for 9mm Major as a wildcat round. Gunpowder selection is crucial when handloading. Only medium- to slow-burning-rate pistol powders are used because they produce lower peak chamber pressures when pushing the bullet to the same velocity as faster-burning powders. On its 9mm Major listing, Atlanta Arms notes, “**Warning: This ammunition EXCEEDS SAAMI Specification and should only be used through a competition race gun.”

Most 9mm Major rounds are loaded as long as possible to help keep peak pressure low. The SAAMI maximum overall length for the 9mm Luger cartridge of 1.169 inches. Black Dot Ammunition (Crawford, Alabama) notes that it loads its 9 Major rounds to 1.160 inches overall, which means the ammunition “will not chamber in most standard 9mm guns to prevent accidentally firing from any non-open type firearms.”

Other ammunition manufacturers load 9 Major, including JJR Ammo, C&S Ammo, Everglades Ammo, Vantage Reloading and Universal Ammo.

Editor’s Note: This article is an excerpt of Gun Digest’s Cartridge’s Of The World.


Raise Your Ammo IQ:

44-Targetposters-pack-GD-reduced-300

Next Step: Get your FREE Printable Target Pack

Enhance your shooting precision with our 62 MOA Targets, perfect for rifles and handguns. Crafted in collaboration with Storm Tactical for accuracy and versatility.

Subscribe to the Gun Digest email newsletter and get your downloadable target pack sent straight to your inbox. Stay updated with the latest firearms info in the industry.

Source link: https://gundigest.com/gear-ammo/ammunition/9mm-major by Gun Digest Editors at gundigest.com

Continue Reading

Trending

Copyright © 2024 Guncountry. All Rights Reserved